94-97 7.3L T4 364 SX-R OBS BYPASS TUBE Complete Kit (Non intercooler-cooled)

$2,875.00

-

    Use 68mm Turbine for fastest spool, towing, M/T and 30% nozzles. Use 74mm Turbine for 80-100% nozzles, 450-550hp and A/T trucks.
  • $0.00
  • –
  • –
  • Total –

Description

7.3 Powerstroke T4 Bypass Turbo Kit with BorgWarner S364SX-R (No Intercooler Required)

Product Description

The Irate Diesel OBS 7.3 Powerstroke T4 bypass turbo kit is a complete T4 mounting system built around the BorgWarner S364SX-R turbo, designed only for 1994.5-1997 OBS trucks. It includes our 304 stainless steel up-pipesand a bypass tube, so you can run a T4 without installing an intercooler. Made in the USA.

It’s built for owners targeting roughly 300-500hp, with great driving manners, fast spool, and the strength to tow. It works with stock injectors up to 238/100 hybrids.

It’s a great fit for the OBS daily driver who wants more than a drop-in turbo but isn’t ready for a full intercooler install. We always recommend an intercooler for heavy towing. If you add one later, you’ll need the intercooler, a bracket kit, boots, and intercooler pipes, all sold separately.

Why the S364SX-R

  • Flows 95 lbs/min, more than the 366SX-E at 87 lbs/min
  • Spools faster than the 364.5 SXE
  • Low rotor inertia for quicker spool
  • Billet compressor wheel with extended tip technology
  • Optimized compressor aerodynamics
  • Ported compressor housing with integrated speed sensor port and pre-machined boost port
  • Interchangeable with existing SX and SX-E turbine housings

What’s in the Kit

  • BorgWarner S364SX-R turbo (64mm S300 SX-R Supercore)
  • IDP T4 mounting system
  • 304 stainless steel up-pipes
  • Bypass tube
  • Boots to connect to 3″ plenums (2.5-3″ compressor outlet boot)

Not included: intercooler, intercooler pipes, or bracket kit. This is a bypass kit.

Turbo Specs

Compressor

  • BorgWarner 4″ inlet / 2.5″ outlet ported compressor housing
  • Integrated speed port (sensor not included)
  • 64/84mm billet compressor wheel with extended tip

Turbine

  • 76/68mm turbine wheel

Supercore Notes

The Supercore is the full turbo minus the turbine housing. It includes turbine housing mounting hardware, clamp plates, cap screws, and mounting gaskets. The speed sensor and turbine outlet V-band are not included. Choose a BorgWarner factory turbine housing.


OBS Install Requirements

  • 3″ inlet plenums required to run the bypass tube. Add our 3″ plenums to your order. Choose 8 bolt or 10 bolt to match your heads.
  • Electric fuel system required for the T4 oil drain to work. See our OBS fuel system.
  • No wastegates are available on OBS trucks.
  • Down pipe: Firewall modifications may be needed depending on body mount condition, even with a 3″ down pipe already in place.
  • Body mounts: Replace worn body mounts so the down pipe fits easily. Shop the body mount kit.

FAQ

What trucks does this fit?
1994.5-1997 OBS Ford F-250 and F-350 trucks with the 7.3L Powerstroke.

Do I need an intercooler?
No. This is a bypass kit. We recommend an intercooler for heavy towing, and you can add one later.

Does it include intercooler pipes?
No. They aren’t included or available as an option with this kit.

How much power does it support?
Around 300-500hp, with stock injectors up to 238/100 hybrids.

What else do I need to install it?
3″ plenums, an electric fuel system for the oil drain, and a turbine housing. Firewall modifications may be needed for the down pipe.

Can I use wastegates?
Not on OBS trucks.

Is the speed sensor included?
No. The port is there, but the sensor is sold separately.

  • Turbo Kit Parts list
    1 Pedestal OBS/SD
    1 L Bracket OBS/SD
    1 Bellowed Up-pipe Assembly OBS/SD
    1 Braided Oil supply line OBS/SD
    1 Stainless Oil drain line OBS/SD
    1 Aluminum turbo drain flange OBS/SD
    1 Aluminum valley drain flange W/O-ring OBS/SD
    1 Stainless Intake Y OBS/SD
    1 Bypass tube with boots and clamps OBS
    1 4” stainless intake pipe OBS/SD
    1 Downpipe lower and upper section OBS 3”, SD 4”. OBS/SD
    1 4” V-band clamp SD downpipe upper to lower connection SD
    1 3.5” or 4” v-band for S300 or S400 style turbo OBS/SD
    1 Band clamp for 2 piece OBS downpipe connection OBS
    1 Compressor intake boot. 4” for S300, 5” for S400 & 5.5” for Race cover. OBS/SD
    2 Clamps for intake boot to turbo and intake pipe. OBS/SD
    1 3/8”NPT X 10JIC 45* fitting OBS/SD
    1 1/2”NPT x 10JIC 45* fitting OBS/SD
    1 1/8”NPT x 6JIC straight fitting OBS/SD
    1 1/4”NPT x 6JIC straight fitting OBS/SD
    1 3/8″ plug for intake Y, not used on SD OBS
    1 Pedestal O-rings OBS/SD
    9 M8 flange bolts for pedestal and up-pipes OBS/SD
    4 M10 studs with flat washers and nuts OBS/SD
    4 M8x40 flange bolts and locking flange nuts, up-pipe to manifold. OBS/SD

Additional information

Weight 50 lbs