Description
Full IDP T4 mounting kit with S472 turbo, and all parts needed for installation!!
This is a great turbo for 350/200 injectors all the way up to 400/400’s! It out flows the 467.7 by 20 lbs/min and comes standard with a 360* thrust and Billet wheel. This turbo flows like an S476 but spools faster!.
NEW RELEASE!!!
The all new S400SX-E 72mm FMW
– 72mm FMW 10-blade compressor
– 87mm Turbine
– 1.10 a/r T4
– Hose Race Cover
– 360 Degree Thrust Bearing
**94-97-Waste-gates NOT available on OBS trucks! Fire wall modifications might be necessary (depending on your body mount conditions) for the down pipe, even if you have a 3″ down pipe for the stock turbo in place already.
**MUST USE IDP plenums on 472 kits
- Turbo Kit Parts list
1 Pedestal OBS/SD
1 L Bracket OBS/SD
1 Bellowed Up-pipe Assembly OBS/SD
1 Braided Oil supply line OBS/SD
1 Stainless Oil drain line OBS/SD
1 Aluminum turbo drain flange OBS/SD
1 Aluminum valley drain flange W/O-ring OBS/SD
1 Stainless Intake Y OBS/SD
1 Intercooler pipes, SD 2 pipes. OBS 3 pipes OBS/SD
1 4” stainless intake pipe OBS/SD
1 Downpipe lower and upper section OBS 3”, SD 4”. OBS/SD
1 4” V-band clamp SD downpipe upper to lower connection SD
1 3.5” or 4” v-band for S300 or S400 style turbo OBS/SD
1 Band clamp for 2 piece OBS downpipe connection OBS
1 Compressor intake boot. 4” for S300, 5” for S400 & 5.5” for Race cover. OBS/SD
2 Clamps for intake boot to turbo and intake pipe. OBS/SD
1 3/8”NPT X 10JIC 45* fitting OBS/SD
1 1/2”NPT x 10JIC 45* fitting OBS/SD
1 1/8”NPT x 6JIC straight fitting OBS/SD
1 1/4”NPT x 6JIC straight fitting OBS/SD
1 3/8″ plug for intake Y, not used on SD OBS
1 Pedestal O-rings OBS/SD
9 M8 flange bolts for pedestal and up-pipes OBS/SD
4 M10 studs with flat washers and nuts OBS/SD
4 M8x40 flange bolts and locking flange nuts, up-pipe to manifold. OBS/SD