Description
Product Description
This is our recommended setup for making over 450 RWHP with your 7.3 Powerstroke and towing at that power level without EGT problems or worry about hurting your engine. It’s a proven combination for the most reliable horsepower, with EGTs kept in check, even at altitude.
The package starts with our complete T4 kit and the BorgWarner S364 SX-R with a .91 A/R housing, and it includes 205cc 30% over injectors. Add an intercooler and bracket kit for a complete intercooled OBS, or add options to build a custom package.
This list assumes you have gauges or a monitor to watch engine vitals.
What’s in the Package
- IDP T4 mounting system with 304 stainless up-pipes and intercooler piping
- BorgWarner S364 SX-R turbo with billet wheel and .91 housing
- 205cc 30% over nozzle injectors
The Turbo: BorgWarner S364 SX-R
The S300 SX-R Super-Core (P/N 13767105022) brings high-performance turbocharging to a wide range of serious builds. It has an 84mm compressor wheel with a 64mm inducer and a proven turbine configuration, for a strong mix of flow, durability, and boost response.
Its 360° thrust bearing makes it a good fit for aggressive builds, competition setups, and towing, where quick spool and top-end power matter.
The Injectors: 205cc 30% Over (Legacy Series)
The 7.3 Powerstroke FFD 205cc injectors can add up to 200hp at the rear wheels with a custom performance tune.
- New nozzles, plunger and barrel assemblies, and seals
- 18-month warranty
A custom tune is required for any aftermarket injector. See the options on this page.
Build a Complete Intercooled OBS
Add an intercooler and bracket kit to finish the setup.
Build a Custom Package
Add options to tailor the package to your truck. This package has proven itself in towing situations.
Compare Our Towing Packages
| 425+ RWHP | 450+ RWHP | 500+ RWHP | 550+ RWHP | |
|---|---|---|---|---|
| Turbo | S364 SX-R, .91 | S364 SX-R, .91 | S368 SX-R, .91 | S368 SX-R, .91 |
| Injectors | 180cc 30% over | 205cc 30% over | 250cc 100% over | 250cc 200% over |
| Injector gain | Up to 200hp | Up to 200hp | Up to 350hp | 350hp+ |
FAQ
How much power does this package make?
It’s built for 450+ RWHP.
Can I tow at that power?
Yes. It’s designed to tow at 450+ RWHP with EGTs in check, even at altitude.
What’s the difference between the 425+ and 450+ packages?
The injectors: 180cc 30% over for the 425+, and 205cc 30% over for the 450+. The turbo is the same.
Do I need a tune?
Yes. A custom tune is required for any aftermarket injector.
Does it include an intercooler?
No. Add an intercooler and bracket kit for a complete intercooled OBS.
Is there a warranty on the injectors?
Yes. 18 months.
info@iratediesel.com
- Turbo Kit Parts list
1 Pedestal OBS/SD
1 L Bracket OBS/SD
1 Bellowed Up-pipe Assembly OBS/SD
1 Braided Oil supply line OBS/SD
1 Stainless Oil drain line OBS/SD
1 Aluminum turbo drain flange OBS/SD
1 Aluminum valley drain flange W/O-ring OBS/SD
1 Stainless Intake Y OBS/SD
1 Intercooler pipes, SD 2 pipes. OBS 3 pipes OBS/SD
1 4” stainless intake pipe OBS/SD
1 Downpipe lower and upper section OBS 3”, SD 4”. OBS/SD
1 4” V-band clamp SD downpipe upper to lower connection SD
1 3.5” or 4” v-band for S300 or S400 style turbo OBS/SD
1 Band clamp for 2 piece OBS downpipe connection OBS
1 Compressor intake boot. 4” for S300, 5” for S400 & 5.5” for Race cover. OBS/SD
2 Clamps for intake boot to turbo and intake pipe. OBS/SD
1 3/8”NPT X 10JIC 45* fitting OBS/SD
1 1/2”NPT x 10JIC 45* fitting OBS/SD
1 1/8”NPT x 6JIC straight fitting OBS/SD
1 1/4”NPT x 6JIC straight fitting OBS/SD
1 3/8″ plug for intake Y, not used on SD OBS
1 Pedestal O-rings OBS/SD
9 M8 flange bolts for pedestal and up-pipes OBS/SD
4 M10 studs with flat washers and nuts OBS/SD
4 M8x40 flange bolts and locking flange nuts, up-pipe to manifold. OBS/SD





